* add new modline with xrandr --newmode
* add mode to output with xrandr --addmode
* set output and dimension with xrandr --output and --mode
The needed steps are done in
/etc/X11/Xsession.d/45custom_xrandr-settings
# $ cvt 1280 1024 60
# 1280x1024 59.89 Hz (CVT 1.31M4) hsync: 63.67 kHz; pclk: 109.00 MHz
# Modeline "1280x1024_60.00" 109.00 1280 1368 1496 1712 1024 1027 1034 1063 \
# -hsync +vsync
# $ xrandr
# Screen 0: minimum 320 x 200, current 1024 x 768, maximum 8192 x 8192
# HDMI-1 disconnected (normal left inverted right x axis y axis)
# VGA-1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
# 1024x768 60.0*
# 800x600 60.3 56.2
# 848x480 60.0
# 640x480 59.9
xrandr --newmode "1280x1024_60.00" 109.00 1280 1368 1496 1712 1024 1027 1034 1063 \
-hsync +vsync
xrandr --addmode VGA-1 1280x1024_60.00
# $ xrandr
# Screen 0: minimum 320 x 200, current 1024 x 768, maximum 8192 x 8192
# HDMI-1 disconnected (normal left inverted right x axis y axis)
# VGA-1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
# 1024x768 60.0*
# 800x600 60.3 56.2
# 848x480 60.0
# 640x480 59.9
# 1280x1024_60.00 59.9
xrandr --output VGA-1 --mode 1280x1024_60.00
[ view entry ] ( 1373 views ) | print article
Server
needed packages: mgetty, pppd
start and stop mgetty on plugin of usbmodem (0572:1329 Conexant Systems (Rockwell), Inc.)
/etc/init/mgetty.conf
# mgetty - dialin daemon
description "mgetty daemon"
start on tty-device-added KERNEL=ttyACM0
stop on tty-device-removed KERNEL=ttyACM0
respawn
exec /sbin/mgetty -s 115200 -D /dev/ttyACM0
/etc/mgetty/login.config
/AutoPPP/ - a_ppp /usr/sbin/pppd auth +chap -pap name dialinserver remotename dialer debug
I use chap instead of pap because of plain password used by pap.
/etc/ppp/chap-secrets
dialer dialinserver password *
/etc/ppp/options.ttyACM0
10.0.0.1:10.0.0.2
Client
needed packages: pppd
/etc/ppp/peers/dialinserver
noauth
connect "/usr/sbin/chat -v -f /etc/chatscripts/dialinserver"
debug
/dev/ttyS0
115200
defaultroute
noipdefault
name dialer
remotename dialinserver
/etc/chatscripts/dialinserver
ABORT BUSY ABORT 'NO CARRIER' ABORT VOICE ABORT 'NO DIALTONE' ABORT 'NO DIAL TONE'
ABORT 'NO ANSWER' ABORT DELAYED
'' ATZ
OK-AT-OK "ATDTnumber"
CONNECT \d\c
/etc/ppp/chap-secrets
dialer dialinserver password *
Connect with "pon dialinserver" and disconnect with "poff dialinserver"
[ view entry ] ( 1040 views ) | print article
sudo apt-get install kexec-tools
change LOAD_KEXEC to true in /etc/default/kexec
[ view entry ] ( 811 views ) | print article
First activate and rise webcam audio input level with alsamixer.
ffmpeg -f video4linux2 -i /dev/video0 -pix_fmt yuv420p -s vga -r 8 -f alsa -ac 1 -ar 16000 -i hw:1,0 -vcodec mpeg4 -b 400k -acodec libmp3lame -ab 80k video.avi
[ view entry ] ( 1210 views ) | print article
I got a funny viennese dialect keyboard, but after start using it i missed a key '<,>,|'
So i searched for a way to remap 'AltGr + y' to '|', 'AltGr + ,' to '<' and 'AltGr + .' to '>'
Console
evaluate the key to change with
#> sudo showkey -s
press the key
here y is 0x2c = 44
here , is 0x33 = 51
here . is 0x34 = 52
test remap with
echo "altgr keycode 44 = bar" | loadkeys
bar is a symbolic name i found at German-Howto
Finally i extended /etc/rc.local with
LOADKEYS=$(which loadkeys)
if [ -x $LOADKEYS ]; then
cat << EOT | $LOADKEYS
altgr keycode 44 = bar
altgr keycode 51 = less
altgr keycode 52 = greater
EOT
unset LOADKEYS
fi
Xorg
evaluate the key to change with
#> xev
press the key
here y is keycode 52
here , is keycode 59
here . is keycode 60
test remap with
xmodmap -e "keycode 52 = y Y y Y bar"
dump keys with
#> xmodmap -pke > ~/.Xmodmap
remove all lines except lines starting with desired keycodes to change.
my ~/.Xmodmap now looks like
keycode 52 = y Y y Y bar U203A guillemotright
keycode 59 = comma semicolon comma semicolon less multiply periodcentered
keycode 60 = period colon period colon greater division U2026
[ view entry ] ( 2464 views ) | print article
<<First <Back | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | Next> Last>>