copy local
cp
cp -dpRx /OLD /NEW
tar
cd /OLD && \
tar -cp --atime-preserve --one-file-system --exclude=/lost+found -f - . \
| ( cd /NEW && tar -xpv --atime-preserve -f - )
rsync
rsync -avHx --delete /OLD /NEW
copy via network
tar
cd /OLD && \
tar -cp --atime-preserve --one-file-system --exclude=/lost+found -f - . \
| ssh 192.168.0.1 "( mkdir -p /NEW ; cd /NEW \
&& tar -xpv --atime-preserve -f - )"
rsync
rsync -avHx --delete /OLD/ root@192.168.0.1:/NEW
rsync -avz -e ssh remoteuser@remotehost:/remote/dir /this/dir/
[ view entry ] ( 1320 views ) | print article
mkdir /boot/dos
cd /boot/dos
cp /usr/lib/syslinux/memdisk .
wget http://www.fdos.org/bootdisks/autogen/FDOEM.144.gz
gunzip FDOEM.144.gz
mkdir /mnt/temp
mount -o loop -t vfat FDOEM.144 /mnt/temp
copy new bios-image and flasher to /mnt/temp
umount /mnt/temp
/boot/grub/menu.lst:
title DosDisk
kernel /boot/dos/memdisk.bin
initrd /boot/dos/FDOEM.144
[ view entry ] ( 919 views ) | print article
The hard work with xinerama / dual screen was:
* set the monitor sync/refresh rate (it won't start without for an old crt not supporting ddc)
* set Option "NoAccel" "true" (screen distortions)
* touchpad only works with dual screen
* instabilities with two different cards (via / ati - resolved by using only ati card that has two VGA connectors)
Testing with: #> X -config /absolutepath/xorg.conf -verbose
xinerama xorg.conf:
Section "Files"dual head xorg.conf:
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "int10"
Load "vbe"
Load "dbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "ru,us"
Option "XkbOptions" "grp:caps_toggle"
EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "Device"
Identifier "dev0"
Driver "via"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "dev1"
Driver "mga"
BusID "PCI:0:20:0"
Screen 1
EndSection
Section "Monitor"
Identifier "monitor0"
Option "DPMS"
EndSection
Section "Monitor"
Identifier "monitor1"
Option "DPMS"
HorizSync 28-50
VertRefresh 60-85
EndSection
Section "Screen"
Identifier "screen0"
Device "dev0"
Monitor "monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "screen1"
Device "dev1"
Monitor "monitor1"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
InputDevice "Generic Keyboard"
InputDevice "Generic Mouse"
Screen "screen0"
Screen "screen1" RightOf "screen0"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "ServerFlags"
Option "Xinerama" "on"
EndSection
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/etc/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "extmod"
Load "GLcore"
Load "dbe"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "ru,us"
Option "XkbOptions" "grp:caps_toggle"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "PHL"
ModelName "PHILIPS 107E"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Option "NoAccel" "true"
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "Radeon RV100 QY [Radeon 7000/VE]"
BusID "PCI:0:20:0"
Screen 0
EndSection
Section "Device"
Option "NoAccel" "true"
Identifier "Card1"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "Radeon RV100 QY [Radeon 7000/VE]"
BusID "PCI:0:20:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "DontVTSwitch" "true"
Option "DontZap" "true"
Option "DontZoom" "true"
Option "BlankTime" "0"
Option "StandbyTime" "0"
Option "SuspendTime" "0"
Option "OffTime" "0"
EndSection
[ view entry ] ( 740 views ) | print article
xorg ati/radeon video driver for ES1000 has DRI disabled
As a workaraound i changed ChipID in xorg.conf to "0x515a"
suggested by http://ubuntuforums.org/showpost.php?p= ... stcount=15
Section "Device"
Identifier "ATI Technologies Inc ES1000"
Driver "ati"
ChipID 0x515a
EndSection
[ view entry ] ( 973 views ) | print article
Because udev didn't know anything of idVendor or idProduct if you remove a device i use ENV{PRODUCT} to match for my unplugged device:
ACTION=="add", KERNEL=="event*", SUBSYSTEM=="input", \
SYSFS{idVendor}=="1234", SYSFS{idProduct}=="5678", \
SYMLINK+="input/myevent"
ACTION=="remove", SUBSYSTEM=="usb", \
ENV{PRODUCT}=="1234/5678/100", \
RUN+="/usr/bin/killall myprog"
[ view entry ] ( 858 views ) | print article
<<First <Back | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | Next> Last>>