* set the monitor sync/refresh rate (it won't start without for an old crt not supporting ddc)
* set Option "NoAccel" "true" (screen distortions)
* touchpad only works with dual screen
* instabilities with two different cards (via / ati - resolved by using only ati card that has two VGA connectors)
Testing with: #> X -config /absolutepath/xorg.conf -verbose
xinerama xorg.conf:
Section "Files"dual head xorg.conf:
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "int10"
Load "vbe"
Load "dbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "ru,us"
Option "XkbOptions" "grp:caps_toggle"
EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "Device"
Identifier "dev0"
Driver "via"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "dev1"
Driver "mga"
BusID "PCI:0:20:0"
Screen 1
EndSection
Section "Monitor"
Identifier "monitor0"
Option "DPMS"
EndSection
Section "Monitor"
Identifier "monitor1"
Option "DPMS"
HorizSync 28-50
VertRefresh 60-85
EndSection
Section "Screen"
Identifier "screen0"
Device "dev0"
Monitor "monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "screen1"
Device "dev1"
Monitor "monitor1"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
InputDevice "Generic Keyboard"
InputDevice "Generic Mouse"
Screen "screen0"
Screen "screen1" RightOf "screen0"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "ServerFlags"
Option "Xinerama" "on"
EndSection
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/etc/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "extmod"
Load "GLcore"
Load "dbe"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "ru,us"
Option "XkbOptions" "grp:caps_toggle"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "PHL"
ModelName "PHILIPS 107E"
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Option "NoAccel" "true"
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "Radeon RV100 QY [Radeon 7000/VE]"
BusID "PCI:0:20:0"
Screen 0
EndSection
Section "Device"
Option "NoAccel" "true"
Identifier "Card1"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "Radeon RV100 QY [Radeon 7000/VE]"
BusID "PCI:0:20:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "DontVTSwitch" "true"
Option "DontZap" "true"
Option "DontZoom" "true"
Option "BlankTime" "0"
Option "StandbyTime" "0"
Option "SuspendTime" "0"
Option "OffTime" "0"
EndSection
[ view entry ] ( 740 views ) | print article
xorg ati/radeon video driver for ES1000 has DRI disabled
As a workaraound i changed ChipID in xorg.conf to "0x515a"
suggested by http://ubuntuforums.org/showpost.php?p= ... stcount=15
Section "Device"
Identifier "ATI Technologies Inc ES1000"
Driver "ati"
ChipID 0x515a
EndSection
[ view entry ] ( 973 views ) | print article
date in unix timestamp: date +%s
convert unix timestamp to date: date --date "Jan 1, 1970 00:00:00 +0000 + $1 seconds"
set date with unix timestamp: date -s "Jan 1, 1970 00:00:00 +0000 + $1 seconds"
[ view entry ] ( 806 views ) | print article
I want to rsync on my local-host via ssh from a remote host without a ssh enabled root account but full access to the whole filesystem.
local-host:
ssh-keygen -t rsacopy ~/.ssh/id_dsa.pub to remote-host:/home/rsyncuser/.ssh/authorized_keys
rsync files with ssh:
rsync -vaHxr --numeric-ids --delete --rsync-path=rsync_wrapper.sh \
-e "ssh -c arcfour -o Compression=no -x" \
rsyncuser@remote-host:REMOTEDIR LOCALDIR
remote-host (source of files to rsync):
groupadd -g 3001 rsyncuser/home/rsyncuser/.ssh/authorized_keys:
useradd -u 3001 -g rsyncuser -s /bin/bash -m rsyncuser
from="192.168.0.2,",command="/home/rsyncuser/validate-rsync.sh"limit access with from (optional).
ssh-dss 012345678...
On sucessfully ssh login command is executed.
/home/rsyncuser/validate-rsync.sh:
#!/bin/sh/usr/bin/rsync_wrapper.sh:
case "$SSH_ORIGINAL_COMMAND" in
*\&*)
echo “Rejected”
;;
*\;*)
echo “Rejected”
;;
*\(*)
echo “Rejected”
;;
*\{*)
echo “Rejected”
;;
*\<*)
echo “Rejected”
;;
*\`*)
echo “Rejected”
;;
rsync\ --server*)
$SSH_ORIGINAL_COMMAND
;;
*)
echo "Rejected"
;;
esac
#!/bin/sh/etc/sudoers:
/usr/bin/sudo /usr/bin/rsync "$@";
rsyncuser ALL = NOPASSWD: /usr/bin/rsync
[ view entry ] ( 831 views ) | print article
apt-get install squirrelmail-locales squirrelmail-decode ispell wngerman
ln -s /etc/squirrelmail/apache.conf /etc/apache2/conf.d/squirrelmail.conf
chgrp -R www-data /usr/share/squirrelmail/
added "de_DE ISO-8859-1" to /var/lib/locales/supported.d/local
dpkg-reconfigure locales
invoke-rc.d apache2 restart
squirrelmail-configure
10/1: de_DE
[ view entry ] ( 758 views ) | print article
<<First <Back | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | Next> Last>>